1, Suitable for all kinds of metal oil and rust removal. 2, Low cost, long-lasting pickling ability, good effect. 3, Operation without acid fog, soak for2-3hours can keep the shine and no corrosion.
Pickling oil removal process in electroplating
H2SO4 (industrial) use concentration: 30-60ml/L (the actual use concentration depends on the workpiece condition, this is the laboratory test index)
HCI (industrial) use concentration: 30-60ml/L (the actual use concentration depends on the workpiece condition, this is the laboratory test index)
INT-60 usage concentration: 30-60ml/L (The actual usage concentration depends on the workpiece condition, this is the laboratory test index)
Operating temperature: room temperature -40℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Phosphating, pickling oil removal process of coating parts
H2SO4 (70%) Use concentration: 100-150ml/L (the actual use concentration depends on the workpiece condition, this is the laboratory test index)
INT-60 use concentration: 20-30ml/L (The actual use concentration depends on the workpiece condition, this is the laboratory test index)
Operating temperature: 20-60℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
1. Suitable for oil removal and wax removal of steel, copper and alloys. 2, save energy, easy to use, long life, economy.
Usage concentration: 50-100ml/L (The actual usage concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: room temperature (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1. Suitable for oil removal of steel, non-ferrous metals and alloys. 2, low temperature: for general oil parts can be cleaned by room temperature and cold water. 3, Good washable property.
Copper and iron parts:
Usage of NaHO: 10-20g/L (Actual usage depends on the condition of the workpiece, which is the laboratory test index)
Usage of Na3PO4:10-20g/L (Actual usage depends on the condition of the workpiece, which is the laboratory test index)
INT-70 usage concentration: 20-50ml/L (The actual usage concentration depends on the workpiece condition, this is the laboratory test index)
Usage of tea tree seeds: 10-20g/L (Actual usage depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 20-50℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Alloy class:
Usage of Na2CO3:100-150ml/L (Actual usage depends on the condition of the workpiece, this is the laboratory test index)
Usage of Na3PO4:100-150ml/L (Actual usage depends on the condition of the workpiece, which is the laboratory test index)
INT-70 usage concentration: 30-50ml/L (The actual usage concentration depends on the workpiece condition, this is the laboratory test index)
Operating temperature: 20-50℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
1, Suitable for oil removal of aluminum, zinc alloy. 2, This product no phosphorus, no harm to human, does not pollute the environment, conducive to emission. 3, Easy to use, long life
Dosage: 30-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 50-80℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Specially used for cleaning aluminum products. 2. It can keep the original luster and smooth after cleaning.
Dosage: 30-60ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 50-80℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Special for aluminum shell cleaning, also for aluminum products, stainless steel, copper and iron products cleaning. 2, Mild reaction, easy to control when cleaning. 3, Room temperate,safe use.
Dosage: 20-50ml/L (The actual concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: room temperature -70℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Suitable for hardware, electronic parts cleaning, also have polishing effect, bright as new after cleaning. 2, Drum with room temp., safe use. 3, Small dosage, non-toxic, environmental protection.
Usage concentration: 10-20ml/L (The actual usage concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: room temperature (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 3-10min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, suitable for aluminum (like aluminum electrolytic capacitor) and copper , iron oil removal treatment. 2, All kind of oil stains and oxide film can be cleaned, can restore the original the luster.
Usage concentration: 3-30ml/L (The actual usage concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 40-70℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)
1, Suitable for cleaning aluminum products, also for animal and plant oil, oil dirt after polish, wax dirt cleaning . 2. Quick fast cleaning speed and thorough enough.
Usage concentration: 30-60ml/L (The actual usage concentration depends on the condition of the workpiece, which is the laboratory test index)
Operating temperature: 40-70℃ (the actual operating temperature depends on the condition of the workpiece, which is the laboratory test index)
Cleaning time: 2-8min (the actual reaction time depends on the condition of the workpiece, which is the laboratory test index)