Liquid polishing wax
The English name of Liquid polishing wax is Liquid polishing wax. Its main compositions are chrome oxide, corundum, iron red and feldspar powder. Chinese name Liquid polishing wax, foreign name liquid polishing wax, also known as polishing fluid. Advantages: Increased production, save cleaning time.
Polishing liquid main components: chrome oxide, corundum, iron red, feldspar powder and other materials! According to different matrix composition and requirements of different fineness and variety.
Liquid polishing wax is also similar to Dongzhan Xinbo polishing wax!
There are also four kinds of processing procedures:
Rough polishing
Medium grinding
Medium polishing
Fine polishing
advantage
1, increase the production, the operator no longer need to interrupt the polishing work, can automatically control the spraying of polishing fluid,
2. Save operation time and improve production capacity.
3, save cleaning time, polishing liquid is water-based formula, polishing engineering cleaning process is easier, can save cleaning time
4, polishing wheel life increases, spraying liquid abrasive agent on grinding wheel edge surface temperature cooling effect,
5, greatly reduce the loss of grinding wheel, thereby increasing the life of grinding wheel.
6, increase the stability of the product, to avoid the uncertainty of manual operation.
Processing technology
1. The polishing groove can be made of ordinary steel plate, the inner surface should be brushed with anti-acid coating, the outer surface should be welded with heat sink, and then put the groove into the cooling
In the slot. The cooling liquid adopts tap water, which can be connected with the washing tank to avoid waste.
2. The workpiece must be polished in the process of dithering, should try to avoid the overlap of the workpiece, if necessary can add gauze separation.
3. Filtering: Cyclic filtering. Diaphragm type PP material filter can be used, two sets of filter elements, one set of use, the other set of cleaning reserve. If the reaction product is not filtered, leaving it attached to the workpiece surface will affect the final brightness.
4. Always clean the sediment in the polish; Never allow metal to fall in the polishing fluid, otherwise it will cause a waste of polishing fluid and then failure.