Degreasing powder
Oil removal powder: using a variety of highly efficient surfactants, stain remover, penetrant, lotion aid and other refined, with good wetting, solubilizing, oil removal ability.
Product introduction:
This product is not inflammable but slightly corrosive. In case of skin contact, immediately rinse with plenty of water for 15min. In case of eye contact, rinse with plenty of water for 15min.
Scope of application: Widely used in metal plastic electroplating printing and dyeing, spraying industry before treatment of a chemical, also used in various metal surface oil removal cleaning industry.
Classification of oil removal powder: according to the nature can be divided into chemical oil removal powder and electric oil removal powder, according to the type can also be divided into steel oil removal powder and alloy oil removal powder.
Oil removal powder alias is also called defat powder, and oil removal agent also has the same function as it, but is liquid.
Oil removal powder: using a variety of highly efficient surfactants, stain remover, penetrant, lotion aid and other refined, with good wetting, solubilizing, oil removal ability.
Main component:
Exterior view: white powdery solid.
PH value: 11.5-14.0 (3% aqueous solution)
Composition: Made of solid salt, not lozenges alkali and other corrosive materials, little environmental pollution.
Use process: 5%-10% HJ-W122 solution immersion or ultrasonic → rinsing → drying
Product introduction
Oil removal powder using a variety of high-quality surfactants, stain remover, penetrant, lotion aid and other refined from low bubble oil removal degreaser, with good wetting, solubilizing and emulsifying ability, has a strong ability to remove oil. No oil film or oil spot can be seen on the surface of the workpiece after cleaning. This product is mainly used in aluminum alloy, zinc alloy, magnesium alloy and other alloy materials cleaning, no damage to the workpiece phenomenon.
Performance characteristics:
1, protect the substrate. No corrosion, discoloration and other phenomena occur on the surface of the workpiece.
2, non-toxic, does not contain heavy metals, nitrite, can be completely biodegradable.
3, strong cleaning force, quick degreasing, can quickly and thoroughly remove the grease on the workpiece.
Process index
1, the appearance of white powder solid.
2. Slight smell
3, PH 4% weak base
4, use concentration 5%-10% (can be adjusted according to the actual situation)
5, the use of temperature 45℃-70℃
6. Processing time is 3-5 minutes
7, process conditions ultrasonic cleaning
Note:
1. If accidentally splashed into eyes, rinse with water or normal saline; Do not eat.
2, the temperature should not exceed 70 degrees, the temperature is not so good.
3, the working liquid has a certain alkaline, should not be exposed to the skin for a long time.
Packing and storage
25kg/ pack, 50kg/ pack. Shelf life 1 year. [1]
Keep in ventilated and cool place to prevent dampness and caking.